Search found 10 matches

by buffalo
Thu Dec 21, 2017 11:45 am
Forum: Troubleshooting
Topic: how to put z-offset in start code
Replies: 1
Views: 1139

how to put z-offset in start code

Hi I figured out with M851, that my z-offset has to be -1.09. Please, how can I insert this in the start code? I am using Cura, the start code is: G28 ;Home G29 G1 Z15.0 F6000 ;Move the platform down 15mm G92 E0 G1 F200 E3 G92 E0 On which position with which command should I insert the offset? I do ...
by buffalo
Tue Nov 28, 2017 6:48 am
Forum: Troubleshooting
Topic: Unable to print in centre
Replies: 2
Views: 1225

Re: Unable to print in centre

Good Morning.

Do you have centered your nozzle and z-probe like here described?

https://github.com/JimBrown/MarlinTarantula/wiki

Maybe you set the offset in wrong point of the firmware (#define X_HOME_POS).
by buffalo
Wed Nov 22, 2017 5:11 pm
Forum: Troubleshooting
Topic: Heating Failed
Replies: 17
Views: 5758

Re: Heating Failed

Yes, please do like you described.

I hope, this will be the solution.
by buffalo
Wed Nov 22, 2017 6:41 am
Forum: Troubleshooting
Topic: Heating Failed
Replies: 17
Views: 5758

Re: Heating Failed

Do you have uncommented #SDSUPPORT in the configuration.h (the second option)?
by buffalo
Wed Nov 22, 2017 6:37 am
Forum: Prints
Topic: increase quality
Replies: 1
Views: 2163

increase quality

Hi Now I'm finally able to print, after a lot of weeks it's working. My first prints have not a good quality, I want to increase this. Actually I'm printing PLA with layer 0,2mm, 210°C, print speed 40mm/s and flow 120. I think, this are the main features for quality? Is there any rule of thumb, what...
by buffalo
Thu Nov 02, 2017 6:13 pm
Forum: Firmware
Topic: How to update firmware
Replies: 7
Views: 9476

Re: How to update firmware

Thank you, royg.
Jim has solved my problem. I had chosen the SN04 sensor, but still manual bed levelling. Changed to bilinear and flashing was ok.

Regards
Friedrich
by buffalo
Thu Nov 02, 2017 6:09 pm
Forum: Hardware
Topic: BLTouch auto bed levelling sensor setup
Replies: 9
Views: 3579

Re: BLTouch auto bed levelling sensor setup

Any updates or reviews about the BLTouch?

Is it better than the green SN04?
Or let me ask it in another way: which sensor is best?

Regards
Friedrich
by buffalo
Tue Oct 31, 2017 8:29 am
Forum: Troubleshooting
Topic: Bed levelling -> crash
Replies: 1
Views: 1083

Bed levelling -> crash

Hi

I have updated my Firmware to the easy config 1.1.x.
Now, when I try to do bed levelling, the nozzle crashes the heatbed in the right end Position of the x-axis, because the green SN04 sensor is not over the bed, it is gone over the edge of the bed. What shall I do now?

regards
Friedrich
by buffalo
Mon Oct 30, 2017 5:06 pm
Forum: Troubleshooting
Topic: Looking for FTDI Driver
Replies: 2
Views: 4726

Re: Looking for FTDI Driver

Thank you!
I think, the D2xx will be the right one? VCP is for virtual com-port and D3xx is for USB 3.0.
by buffalo
Sun Oct 29, 2017 9:31 am
Forum: Troubleshooting
Topic: Looking for FTDI Driver
Replies: 2
Views: 4726

Looking for FTDI Driver

Please, can anybody send me the FTDI Driver for the Tarantula?
I tried to download it like described from http://www.elf-games.com/tevo/usbdriver.pdf, but the site with the Group gives me an error message and I'm not a member of Facebook, so I can't get it from them.

regards
Friedrich