Server power supply with software on and off
- MikeHertel
- Posts: 3
- Joined: Wed May 24, 2017 8:14 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: Server power supply with software on and off
I must have got a defective power supply..Everything looks great with no load on it, but once I have the bed and hotend heating up, my power seems to "hickup".. Voltage will drop to almost 0 and then go back up.. and it's just intermittent as well..
Re: Server power supply with software on and off
I have tried to edit the firmware, but i cant get the command to start the psu to work,
I did solder a switch inn and that works, but i cant get the frimware to start the psu.
Cheers
I did solder a switch inn and that works, but i cant get the frimware to start the psu.
Cheers
- incog.nito
- Posts: 1
- Joined: Wed Jun 21, 2017 2:02 pm
Re: Server power supply with software on and off
Hi can anyone update this with the illustrations? Please 

-
- Posts: 1
- Joined: Sat Sep 29, 2018 1:03 am
Re: Server power supply with software on and off
Does anyone fave the info from the arcaded post? It seems the site is down as of 9-28-18.
Thanks in advance.
Thanks in advance.
- Lee
- Site Admin
- Posts: 173
- Joined: Thu Mar 23, 2017 3:53 pm
- Has thanked: 39 times
- Been thanked: 44 times
Re: Server power supply with software on and off
The body of the arcaded post is quoted in the first post of this thread. Unfortunately, it appears the images have been lost in the ether; either the user deleted them from their DropBox account (original location) or removed their account entirely. The AWS link is also returning a "denied" action for viewing the images.jbrillo1126 wrote: ↑Sat Sep 29, 2018 1:12 amDoes anyone fave the info from the arcaded post? It seems the site is down as of 9-28-18.
Thanks in advance.
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D
Who is online
Users browsing this forum: No registered users and 1 guest