Lee's Marlin and S3D Settings

The programming behind the Tarantula
Post Reply
User avatar
Lee
Site Admin
Posts: 173
Joined: Thu Mar 23, 2017 3:53 pm
Has thanked: 39 times
Been thanked: 44 times

Lee's Marlin and S3D Settings

Post by Lee » Sat Apr 01, 2017 3:32 am

I've been asked for my settings. I'm attaching a .zip containing my current Marlin 1.1.0 RC8 files minus my machine-specific setting. Mostly stock machine; small bed, no auto level, single Z motor.

My customizations:
-Acceleration set to 800
-Jerk set to 8
-Y stepper on left side, when looking from front
-LCD says "Tevo-3D-P.com Ready." You can change "Tevo-3D-P.com" in Configuration.h at "#define CUSTOM_MACHINE_NAME"
-Lin_Advance enabled, default to K0 so it's not actually doing anything. Specify "M905 K#" in your start gcode to use it.
-Mesh leveling is enabled
-EEPROM is enabled

------------------------------

I'm also attaching my Simplify3D profile that I'm currently using on my Hangprinter build. All my S3D profiles are essentially the same with small changes to Extra Restart Distance and Nozzle Temperature, depending on filament brand.
You do not have the required permissions to view the files attached to this post.
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D

Dave
Posts: 35
Joined: Fri Mar 24, 2017 9:13 pm
Has thanked: 15 times
Been thanked: 16 times

Re: Lee's Marlin and S3D Settings

Post by Dave » Thu May 11, 2017 11:10 am

With all the downloads, I'm surprised that no one got the April fools joke.

Maybe no one tried it :roll:

User avatar
Lee
Site Admin
Posts: 173
Joined: Thu Mar 23, 2017 3:53 pm
Has thanked: 39 times
Been thanked: 44 times

Re: Lee's Marlin and S3D Settings

Post by Lee » Thu May 11, 2017 4:22 pm

Dave wrote:
Thu May 11, 2017 11:10 am
With all the downloads, I'm surprised that no one got the April fools joke.

Maybe no one tried it :roll:
What joke?
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D

Dave
Posts: 35
Joined: Fri Mar 24, 2017 9:13 pm
Has thanked: 15 times
Been thanked: 16 times

Re: Lee's Marlin and S3D Settings

Post by Dave » Thu May 11, 2017 5:32 pm

The Lee/** at the top of config.h being on the wrong side of the righteous and stopping the compile :lol:

As it was on April the first, I assumed it was humor....

User avatar
Lee
Site Admin
Posts: 173
Joined: Thu Mar 23, 2017 3:53 pm
Has thanked: 39 times
Been thanked: 44 times

Re: Lee's Marlin and S3D Settings

Post by Lee » Thu May 11, 2017 6:21 pm

Ohh, that was a mistake. I'll fix that and re-upload.

I mean...yeah...April Fools ... lol

-EDIT-

Fixed.
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest