Missing lines issue

Troubleshoot issues with the Little Monster
Post Reply
User avatar
Posts: 4
Joined: Sat Nov 04, 2017 2:14 pm

Missing lines issue

Post by MikeKölbl » Tue Nov 07, 2017 11:25 pm

Good evening/night,

I have a little trouble with my LM and I am not sure how to fix it yet.
Maybe you have a hint for me?

For testing I try to print this thing: https://www.thingiverse.com/thing:2018624
I downloaded it and sliced it with Repetier Host and Slic3r (with the ini file provided by Tevo on the SD card).
The first layer sticks on bed but it is not solid, instead there are gaps between the printed lines - like the Slicer expected 3mm PLA instead of 1.75mm. I checked it twice - Repetier Host and Slic3r are set to 1.75mm which matches the used PLA.

Has anybody printed this object on a LM without problems?
Could somebody pleased provide it's monster.ini so I can check if there are different settings in mine?

Thank you so much for your help,

User avatar
Posts: 116
Joined: Tue Mar 28, 2017 10:56 pm
Location: Australia
Has thanked: 38 times
Been thanked: 31 times

Re: Missing lines issue

Post by royg » Thu Nov 09, 2017 7:02 am

Can you please post a photograph of the problem after you try to print this object on your printer ?

Tevo Tornado (MKS Gen L version) - Genuine E3dV6 - BLTouch
Tevo Tarantula with a Laser Cutter/Engraver Add-on.
OctoPi (on an Odroid XU4)
Fusion 360, Cura, Slic3r, Ideamaker

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest