controlboard on little monster

The programming behind the Little Monster
Post Reply
scubasky
Posts: 7
Joined: Thu Nov 30, 2017 7:59 am

controlboard on little monster

Post by scubasky » Sat Dec 02, 2017 1:41 pm

i need the firmware for the control panel on the little monster please if anyone can help

User avatar
royg
Posts: 81
Joined: Tue Mar 28, 2017 10:56 pm
Location: Australia
Has thanked: 33 times
Been thanked: 21 times

Re: controlboard on little monster

Post by royg » Sat Dec 02, 2017 10:50 pm

I think this might be what you're after ...... The first link is to the Firmware download:

https://www.thingiverse.com/groups/tevo ... opic:14437

Then you need the config file for the Little Monster, which Charles has kindly uploaded here:

viewtopic.php?f=28&t=17

I hope that info helps,

RoyG
Tevo Tarantula - Large Bed - E3dV6 - BLTouch
OctoPi (on a Raspberry Pi 3B)
Cura

scubasky
Posts: 7
Joined: Thu Nov 30, 2017 7:59 am

Re: controlboard on little monster

Post by scubasky » Sun Dec 03, 2017 9:37 am

Thx for the replies can anyone help me to flash my tft28 board as i have loaded wrong files on it and it wont reload the new files

User avatar
royg
Posts: 81
Joined: Tue Mar 28, 2017 10:56 pm
Location: Australia
Has thanked: 33 times
Been thanked: 21 times

Re: controlboard on little monster

Post by royg » Sun Dec 03, 2017 9:40 pm

It seems like the best source of reliable information on the firmware for the TFT28 and TFT32 boards might be the MakerBase MKS GitHub web site - https://github.com/makerbase-mks/MKS-TFT

You can download the correct(up to date) firmware from this Github web site, and the site has the update instructions (scroll down on the first page to find the instructions).

There are some issues listed on the GitHub page that mention that you need to use an SD Card that is 2GB or smaller, otherwise the firmware update fails. Have a read -there's a good chance you'll find you answer on the GitHub site.

There's also a G+ site for MakerBase - https://plus.google.com/communities/116 ... 5512248850 If the Github site doesn't provide the answers, then have a read of the G+ site, and if necessary - post a question there.

Hope that info's helpful.

Regards,

RoyG
Tevo Tarantula - Large Bed - E3dV6 - BLTouch
OctoPi (on a Raspberry Pi 3B)
Cura

scubasky
Posts: 7
Joined: Thu Nov 30, 2017 7:59 am

Re: controlboard on little monster

Post by scubasky » Mon Dec 04, 2017 6:04 am

Thx again for your info i will check it out later will keep you posted

scubasky
Posts: 7
Joined: Thu Nov 30, 2017 7:59 am

Re: controlboard on little monster

Post by scubasky » Tue Dec 05, 2017 6:57 pm

Hi there i have tried everything possible but cant get rid of the reprap i have installed on my tft28 any ideas please i am frustrated and need to get my printer up and working if anyone can help me i would appreciate it greatly thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest