Slicer settings for Flash

General topics regarding the Flash
Post Reply
drmacro
Posts: 3
Joined: Tue Oct 16, 2018 8:35 pm

Slicer settings for Flash

Post by drmacro » Tue Oct 16, 2018 8:44 pm

I'm waiting for my flash to arrive, so I figured I'd get a few things ready.

I have used Slic3r before with my A101. But I figured I give ideaMaker a shot.

Is there a list of typical/required settings somewhere?

When I started to do a new profile in ideaMaker and it wanted typical things like nozzle size, bed size, etc.

But I got to things like max bed/nozzle temp, steps, etc. there is little info to found on the web.

Any pointers appreciated! :)

jimbuckeye
Posts: 1
Joined: Fri Oct 26, 2018 3:25 am

Re: Slicer settings for Flash

Post by jimbuckeye » Fri Oct 26, 2018 3:30 am

I have a Tornado Gold and am trying to set up a profile as well. If you are successful, please post details.

drmacro
Posts: 3
Joined: Tue Oct 16, 2018 8:35 pm

Re: Slicer settings for Flash

Post by drmacro » Fri Oct 26, 2018 1:30 pm

Yeah, not much to be found...

It's similar to others in the same class, so similar settings might be a good place to start.

I'll give it try when it arrives.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest