Solved ! Problem after Firmware Update
Solved ! Problem after Firmware Update
I use a original Tevo Firmware.
It was a Firmware Problem.
When i use https://www.dropbox.com/s/tngyoqn6hqokl ... TLM_v2.zip it was ok.
But other Logos.
When i put the Tevo Logos on the Card it gave other problems.
Can anyone help me.
It was with the Firmware from Tevo Webside.
And with the Firmware from Alice YU from Tevo at Facebook.
But on Facebook is no bin File in the .zip.
And on the Firmware from Tevo Webside is the bin File from 2016.
You do not have the required permissions to view the files attached to this post.
Last edited by roth on Thu Jul 05, 2018 9:52 am, edited 1 time in total.
Re: Problem after Firmware Update
I have testet a little further.
Tevo Version based on Version 1.2 from 2016.
All versions below 3.0 have the error.
Also the versions of https://github.com/makerbase-mks/MKS-TF ... %20version
Hardware defect?
I dont know.
For it to work again, a new firmware would have to be created based on TFT28_32_v3.0.2 Release file.zip.
Or another hardware unfortunately.
I also do not understand why that is.
https://github.com/makerbase-mks/MKS-TF ... TFT2.8-3.2
Tevo Version based on Version 1.2 from 2016.
All versions below 3.0 have the error.
Also the versions of https://github.com/makerbase-mks/MKS-TF ... %20version
Hardware defect?
I dont know.
For it to work again, a new firmware would have to be created based on TFT28_32_v3.0.2 Release file.zip.
Or another hardware unfortunately.
I also do not understand why that is.
https://github.com/makerbase-mks/MKS-TF ... TFT2.8-3.2
- GolesLigaMx
- Posts: 1
- Joined: Mon Jul 16, 2018 4:02 pm
- Has thanked: 1 time
Re: Solved ! Problem after Firmware Update
Hi can u help me ? I need the files to the tevo lm tflash AND the touchscreen sd please
- royg
- Posts: 116
- Joined: Tue Mar 28, 2017 10:56 pm
- Location: Australia
- Has thanked: 38 times
- Been thanked: 31 times
Re: Solved ! Problem after Firmware Update
Roth,
Check your spam folder. Email notifications from this forum are working, but often end up in your email client's spam folder. You need to mark messages that come from the forum as "not spam", so that future notifications from the forum are delivered to your inbox.
RoyG
Tevo Tornado (MKS Gen L version) - Genuine E3dV6 - BLTouch
Tevo Tarantula with a Laser Cutter/Engraver Add-on.
OctoPi (on an Odroid XU4)
Fusion 360, Cura, Slic3r, Ideamaker
Tevo Tarantula with a Laser Cutter/Engraver Add-on.
OctoPi (on an Odroid XU4)
Fusion 360, Cura, Slic3r, Ideamaker
- Lee
- Site Admin
- Posts: 173
- Joined: Thu Mar 23, 2017 3:53 pm
- Has thanked: 39 times
- Been thanked: 44 times
Re: Solved ! Problem after Firmware Update
That's just the nature of phpbb mailer daemon, unfortunately. I don't have the email issue on vBulletin sites, but they require a lot more upkeep and time investment on my part.royg wrote: ↑Wed Jul 25, 2018 1:16 amRoth,
Check your spam folder. Email notifications from this forum are working, but often end up in your email client's spam folder. You need to mark messages that come from the forum as "not spam", so that future notifications from the forum are delivered to your inbox.
RoyG
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D
Re: Solved ! Problem after Firmware Update
Hi, I think I have a firmware problem also, can you please send me your firmware, also is it only for printer or you have one for screen also..
-
- Posts: 1
- Joined: Sat Sep 29, 2018 8:10 am
Re: Solved ! Problem after Firmware Update
Hi, I think I have a firmware problem also, can you please send me your firmware
Who is online
Users browsing this forum: No registered users and 1 guest