MagoKimbra MK4duo

The programming behind the Tarantula
Post Reply
User avatar
Lee
Site Admin
Posts: 165
Joined: Thu Mar 23, 2017 3:53 pm
Has thanked: 37 times
Been thanked: 44 times

MagoKimbra MK4duo

Post by Lee » Wed May 10, 2017 5:16 am

Image

Derek did all the hard work, I just helped find and enable features to get it working. It's Marlin based. Currently printing a big rose in PLA to compare to my last Marlin 1.1.0-RC8 print.

https://github.com/MagoKimbra/MK4duo

Quick reading, looks like it's written for the Arduino Due, which is a 32-bit board. Haha, running it on my MKS Base v1.4!
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D

User avatar
Lee
Site Admin
Posts: 165
Joined: Thu Mar 23, 2017 3:53 pm
Has thanked: 37 times
Been thanked: 44 times

Re: MagoKimbra MK4duo

Post by Lee » Fri Aug 25, 2017 4:56 pm

So this has been updated to version 4.3.26-dev and I've got it running on my Tarantula. I will edit a few settings and upload it here for your use.
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D

User avatar
Lee
Site Admin
Posts: 165
Joined: Thu Mar 23, 2017 3:53 pm
Has thanked: 37 times
Been thanked: 44 times

Re: MagoKimbra MK4duo

Post by Lee » Wed Aug 30, 2017 3:19 pm

Here is my first release of the MK4Duo adaptation for Tevo!

This is what I'm running currently with no issues, version 4.3.26-dev.

The one feature I have intentionally disabled is Lin_Advance, as there's a code issue somewhere that prevents it from compiling. I never used it anyways, so no loss for me, but I commented on the dev's Git so it can be looked into and hopefully fixed in a later version, for those that do use it.
You do not have the required permissions to view the files attached to this post.
Printers: Tarantula | FLSun Delta
Firmware: Marlin 2.0 | Marlin 1.1.9
Slicer: Simplify3D

mutimark
Posts: 1
Joined: Sat May 12, 2018 12:37 pm

Re: MagoKimbra MK4duo

Post by mutimark » Mon May 14, 2018 4:57 pm

i am kind of late to this but can anyone explain how to download this to mks base v1.4 and how to connect the nextion display to the board

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest