TFT turns off and no command response

Troubleshoot issues with the Little Monster
Post Reply
Batub
Posts: 1
Joined: Thu Jun 07, 2018 8:25 am

TFT turns off and no command response

Post by Batub » Thu Jun 07, 2018 8:38 am

Hello everybody, I'm new here and sadly to report an issue, maybe could help someone else in future.

After some days of comtinue work the printer suddently stopped stay on and respond to any command.

In the link below you can see the behavior of the machine I purchased in october 2017

https://photos.app.goo.gl/feU4qMUp5Z2Shcde9

The monitor turns off after a minute since the boot on. Then the less I wait for a reboot and the faster the monitor shuts off. Pressing the commands in the TFT sometimes the printer self rebooted but I didnt care because after the reboot everything was fine. ​

Sorry for english mistakes
Ciao
Luca

User avatar
Xerxes
Posts: 39
Joined: Fri Nov 24, 2017 7:52 pm
Has thanked: 7 times
Been thanked: 3 times

Re: TFT turns off and no command response

Post by Xerxes » Sat Jun 23, 2018 5:28 pm

All I can suggest is make sure the sdcard is working and reinstall the firmware on it. Others have reported issues with the smoothieboard corrupting the card contents over time, or having problems with random sdcards, where changing the card seemed to solve it.

See this post for the firmware

viewtopic.php?f=28&p=818

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests